Alesis Strike AMP 8 2000-watt Powered Drum Amplifier
The Strike Amp 8 electronic drum amp is your perfect practice companion, featuring a handsomely-housed 8" woofer and built-in mixer. Want to invite some friends over to jam? The Strike Amp 8 cuts through the mix so you won't get drowned-out by your bandmates. Whatever the situation, the Alesis Drums Strike Amp Series are the best amps to power your drums.
2000 Watts of Power and Clarity
With 2000 watts of explosive bi-amplified power and super high-performance transducers, this speaker will always play loud and clear, in any space, in any situation - whether you're performing, recording or rehearsing. The heavy-duty 8-inch low frequency driver really adds the "kick" to kickdrum.
Feature Packed - The BEST Amp to Power Your Drums!
The Strike Amp 8 has all the versatility and features needed to fit in anywhere and it's a snap to set up and use. You can use it vertically or tilt it back horizontally like a stage monitor. There's an XLR output to link another Strike Amp 8 or send your performance to another input device. Need to customize the sound for that "just right" tone? Use the Contour EQ control. And the (2) XLR/TRS 1/4-inch combo inputs with independent volume controls and clip indicator means there is virtually unlimited hookup versatility and you'll never unknowingly overdrive the speaker into distortion.
Features
• 2000 watts of peak power delivers clarity, punch and more than enough headroom for any performance or practice space
• Specially-voiced 8-inch woofer and high frequency compression driver deliver your drum sounds with precise, full response across the entire frequency range without any artificial colouration
• (2) XLR/TRS 1/4-inch combo inputs with independent volume controls and clip indicator
• XLR output to link another Strike Amp 12 or send your performance to another input device
• Lightweight and flexible tilt-back cabinet design that can also be pole-mounted
• Contour EQ switch to control your sound
• Ground-Lift switch eliminates unwanted noise
• Includes IEC Power cable
Specifications
Output Power
2000 W (peak, 1300 LF + 700 HF)
1000 W (continuous RMS, 650 LF + 350 HF)
Drivers
Low-Frequency: 8.0" (203 mm) driver, 2.5" (65 mm) high-temperature voice coil
High-Frequency: 1.4" (35 mm) neodymium driver with precision waveguide
Speaker
Crossover Frequency: 2.5 KHz
Maximum SPL: 129 dB (peak), 126 dB (continuous) (dB-SPL @ 1 m)
Frequency Response: 62 Hz 20 kHz (+3 dB)
Frequency Range: 52 Hz 22 kHz (-10 dB)
Horn Coverage: 90 degree horizontal x 60 degree vertical (nominal)
Equalization: Contour switch with low- and high-frequency +3 dB boost
Connectors
(2) XLR/TRS 1/4" (6.35 mm) combo inputs
(1) XLR link output
(1) IEC power cable input
Controls: Power switch, (2) volume control knobs (1 per input), EQ contour switch, ground-lift switch
Indicators: Power LED (rear panel), clip limiter LED
Protection: Electronic clip, thermal & transducer overdrive
Power
Connection: IEC
Input Voltage: 100 V~, 110120 V~, 220240 V~; 50/60 Hz (switchable)
Fuse: 100120V T10AL AC250V / 220240V T5AL AC250V
Consumption: 800 W
Design
Enclosure: Trapezoidal, injection-molded polypropylene enclosure with perforated steel grille
Mounting Standard: 36 mm pole socket
Dimensions: 434 x 256 x 245 mm (17.1 x 10.1 x 9.6")
Weight: 9.2 kg (20.2 lbs.)
2000 Watts of Power and Clarity
With 2000 watts of explosive bi-amplified power and super high-performance transducers, this speaker will always play loud and clear, in any space, in any situation - whether you're performing, recording or rehearsing. The heavy-duty 8-inch low frequency driver really adds the "kick" to kickdrum.
Feature Packed - The BEST Amp to Power Your Drums!
The Strike Amp 8 has all the versatility and features needed to fit in anywhere and it's a snap to set up and use. You can use it vertically or tilt it back horizontally like a stage monitor. There's an XLR output to link another Strike Amp 8 or send your performance to another input device. Need to customize the sound for that "just right" tone? Use the Contour EQ control. And the (2) XLR/TRS 1/4-inch combo inputs with independent volume controls and clip indicator means there is virtually unlimited hookup versatility and you'll never unknowingly overdrive the speaker into distortion.
Features
• 2000 watts of peak power delivers clarity, punch and more than enough headroom for any performance or practice space
• Specially-voiced 8-inch woofer and high frequency compression driver deliver your drum sounds with precise, full response across the entire frequency range without any artificial colouration
• (2) XLR/TRS 1/4-inch combo inputs with independent volume controls and clip indicator
• XLR output to link another Strike Amp 12 or send your performance to another input device
• Lightweight and flexible tilt-back cabinet design that can also be pole-mounted
• Contour EQ switch to control your sound
• Ground-Lift switch eliminates unwanted noise
• Includes IEC Power cable
Specifications
Output Power
2000 W (peak, 1300 LF + 700 HF)
1000 W (continuous RMS, 650 LF + 350 HF)
Drivers
Low-Frequency: 8.0" (203 mm) driver, 2.5" (65 mm) high-temperature voice coil
High-Frequency: 1.4" (35 mm) neodymium driver with precision waveguide
Speaker
Crossover Frequency: 2.5 KHz
Maximum SPL: 129 dB (peak), 126 dB (continuous) (dB-SPL @ 1 m)
Frequency Response: 62 Hz 20 kHz (+3 dB)
Frequency Range: 52 Hz 22 kHz (-10 dB)
Horn Coverage: 90 degree horizontal x 60 degree vertical (nominal)
Equalization: Contour switch with low- and high-frequency +3 dB boost
Connectors
(2) XLR/TRS 1/4" (6.35 mm) combo inputs
(1) XLR link output
(1) IEC power cable input
Controls: Power switch, (2) volume control knobs (1 per input), EQ contour switch, ground-lift switch
Indicators: Power LED (rear panel), clip limiter LED
Protection: Electronic clip, thermal & transducer overdrive
Power
Connection: IEC
Input Voltage: 100 V~, 110120 V~, 220240 V~; 50/60 Hz (switchable)
Fuse: 100120V T10AL AC250V / 220240V T5AL AC250V
Consumption: 800 W
Design
Enclosure: Trapezoidal, injection-molded polypropylene enclosure with perforated steel grille
Mounting Standard: 36 mm pole socket
Dimensions: 434 x 256 x 245 mm (17.1 x 10.1 x 9.6")
Weight: 9.2 kg (20.2 lbs.)
