sE Electronics sE7 SP Small Diaphragm Condenser Microphone, Matched Pair

sE Electronics

  • $238.00

Will not ship until

The sE7 is a high-quality back-electret small diaphragm condenser microphone intended for a wide range of studio and live sound applications, from acoustic guitars to pianos to drums and beyond. With an optimized acoustic design, discrete class-A circuitry and a transformerless output, it delivers clear, natural sound quality at all frequencies, without suffering from fizzy highs or a lack of low-frequency punch.

The discrete electronics and the switchable attenuation pad ensure a high dynamic range, with high sound pressure level (SPL) handling capability and extremely low-noise components. The switchable low-cut filter helps eliminate rumble or footfall noise, and can also compensate for an excess of bass frequencies caused by the proximity effect. This enables the sE7 to close-mic many instruments including electric guitar speaker cabinets, brass instruments and drums.

Reliable operation even in demanding on-stage applications in difficult environments is ensured by the roadworthy all-metal design, robust construction, and high-quality manufacturing standards.

What's in the Box
• 2x sE7 microphones
• 2x mic clips (with thread adapters)
• 2x wind screens

Technical Specifications
Capsule: 1/2" back-electret condenser capsule
Polar patterns: Cardioid
Frequency Range: 20 20,000 Hz
Sensitivity: 19 mV/Pa (-34.5 dBV)
Max. SPL (0.5% THD): 136 / 156 dBSPL(0/20 dB Attenuation pad)
Equivalent Noise Level: 16 dB(A)
Dynamic Range: 120 / 140 dB (0/20 dB Attenuation pad)
Signal-to-Noise Ratio: 78 dB
Low Cut Filter: 80 Hz, 6 dB/Oct, switchable
Attenuation Pad: 20 dB, switchable
Powering: 48 Volts according to IEC 61938
Electrical Impedance: 1k Ohms
Current Consumption: 3.0 mA
Connectivity: 3-pin male XLR connector
Dimensions (each microphone): Diameter - 23 mm (0.91 in.) Length: 120 mm (4.72 in.)
Weight: 128 g (4.52 oz.)

We Also Recommend